ECE Department has 12 well established Air-Conditioned Laboratories cater to the needs of UG as well as PG students.

Some of the laboratories are:

1. Electronic Devices & circuits Lab
2. Basic Simulation Lab-I
3. Basic Simulation Lab-II
4. Communications Lab
5. Digital Electronics Lab
6. Electronic Circuit Analysis Lab
7. e-CAD & VLSI Lab
8. Embedded Systems Lab
9. Electrical & Electronics Lab 
10. Research Lab

Special Software packages likePSPICE, MATLAB, CADENCE TOOLS, VHDL, MULTISIM, MODELSIM,  KIEL are made available to Students.

The ECE department has a separate block with eight laboratories and state-of-art equipment.The total area of ECE dept is 1676 sq.mtrs. The department has six classrooms equipped with LCD  projectors. The department also has one OHP projector.The classrooms are well ventilated and furnished with black board, white screen and overhead projector. Departmental library,Association activity  Club  , Innovative , Research lab and Departmental seminar Hall


During the last 3 years, the department has developed the complete infrastructure required for conducting regular theory classes and laboratories for practical’s related to B.Tech & M.Tech program. The department has spent a substantial amount for procuring useful software packages such as VHDL, XILINX, MATLAB, P-SPICE & KIEL software etc. Communication laboratory is quite well-equipped with seven microwave benches, Digital & Analog Communication trainer kits, storage oscilloscope, Spectrum Analyzer (500MHz) etc. With sufficient trainer kits and software packages in Microprocessor & Micro controller laboratories. The well-established Electronic Computer Aided Design (ECAD) laboratory facilitated in organizing a workshop on VLSI design. The following laboratories are established and are well equipped as per the curriculum requirements.

Basic Simulation lab:

Two BS Lab has been established in the year 2010 caters the need of II year UG students. This lab has sufficient number of systems with networking to implement the basic concepts in the area of signal and systems using MATLAB software.

Electronic Circuit Analysis (ECA) Lab:

In this laboratory, the students are trained to design various electronic circuits like power amplifiers, tuned amplifiers, regulators, oscillators, feedback amplifiers using Multisim software and hardware trainer kits. The lab has Multisim 2001 version software for conducting software experiments and hardware trainer kits, CRO’s, DC power supplies, Function Generators, MultiMate’s for conducting hardware experiments. The lab is equipped with 36 number of computer systems with online UPS which are networked.

Pulse Digital Circuits (PDC) Lab:

The Laboratory is well equipped with sufficient number of Function & signal Generators, CRO's, Regulated power supplies, bread boards, digital multimeters and Decade resistance, capacitance and Inductance boxes etc.for the students to conduct experiments based on topics like Multivibrators, Schmitt trigger, logic gates, Flip-Flops, Linear & Non linear wave shaping, sweep circuits, combinational circuits, and relaxation oscillator. The Lab is also equipped with different kits to study and analyze the experiments on above topics.

Analog Communication (AC) Lab:

The laboratory is well equipped with different modulation and demodulation kits such as AM, FM , DSB-SC, SSB-SC, and TDM etc. Also the above experiments have been simulated using “MATLAB Version 10”. The lab is also equipped with a Spectrum analyzer, Digital storage oscilloscopes of 40 MHz, 2 channel 60MHz Digital storage oscilloscopes

Integrated Circuits and Applications (ICA) Lab:

The laboratory consists of about 50 experimental trainer kits on linear and digital IC Applications. Apart from this, the lab has an IC tester, Bread Board trainer kits, 20MHz CRO's and Function Generators. The lab caters to the needs of all branches of the institution.

Microprocessor & Micro controller (MP&MC) Lab:

The laboratory has been established to satisfy the needs in the area of microprocessors & Micro controllers focusing on embedded systems. The Lab has 10 micro controller trainer kits, 10 microprocessor trainer kits and 20 micro controller development board sets. In addition to these a wide range of micro controllers and microprocessors are available for experiments and project work. In addition to these there are 36 networked computer systems with latest configuration. For demonstration and explanation of the experiments an LCD projector is fixed. A 11KVA UPS is available for un interrupted power.

Digital Signal Processing Lab:

This laboratory is equipped with Texas manufactured DSP starter kits with the core processor being TMS320C6713. This lab exposes the aspects of Digital Signal Processing. Many of the algorithms and filter designing related to DSP are implemented in MATLAB software, Code Composer Studio ( Full Version) and using TMS320C6713 DSP processor.

Digital Communication (DC) Lab:

The lab has a number of digital communication trainer kits such as ASK, FSK, PSK, PCM and DPCM etc. The lab also consists of 30 MHz CROs, 2 Channel 60 MHz Digital storage oscilloscopes and 3MHz Function generator.


ECAD & VLSI lab is established in the year 2011 and is equipped with sufficient number of systems with online UPS and networking. The ECAD &VLSI lab is utilized by both ECE and ETM students. The lab is set up according to the standards set by JNTU. The lab has sufficient soft ware such as Xilinx Universal trainer unit, FPGA module, VLSI design suit consisting of universal base unit, XILINX CPLD module .Recently, The ECAD & VLSI lab is updated with the new software i.e. CADANCE TOOLS with 30 users.

Micro Wave & Optical Communication (MW&OC) Lab:

This laboratory is well equipped with 6 Reflex Klystron test benches, 2 Gunn Oscillators test benches with different kinds of loads. It also consists of 8 VSWR meters, 10 CROs,. Microwave antennas like Pyramidal horn, E-Plane and H-Plane sectored horns are also available.

Embedded Systems Lab:

Embedded Systems Lab is equipped with ARM7, ARM9, PSoC development kits with PSoC1 and PSoC3 add on modules, 8051 Development boards, PIC development boards, Universal Programmers, etc.